SMC Networks SMCWUSBT-G User Manual page 19

Wireless USB 2.0 Adapter
Right clicking on the tray icon
appears.
Each item under the menu is defined below.
Open SMCWUSB
108Mbps Wireless USB
2.0 Adapter Utility ...
Preferences
Enable/Disable Radio
Manual LEAP Login
Reauthenticate
Select Profile
Show Connection Status
Checking the Connection Status
12
, you can see a menu on which configuration items of the utility
Help Open the online help.
Exit Exit the utility application.
Launch the utility. Use the utility to configure the profile or
view status and statistics information.
Set the Startup Options and Menu Options for the utility.
Check whether the program should start automatically when
Windows starts, and check the menu items that should
appear on the popup menu.
Enable or disable the RF Signal.
Log in to LEAP manually, if LEAP is set to manually prompt
for user name and password on each login.
Re-authenticate to the access point.
Click a configuration profile name to switch to it. If no
configuration profile exists for a connection, add a profile
first.
Display the Connection Status window. This window
displays information about the connection:
Active Profile
Auto Profile
Selection
Connection Status
Link Quality
SSID
Access Point
Name
Access Point IP
Address
Link Speed
Client Adapter IP
Address
Displays the name of the active
configuration profile.
Shows whether auto profile selection
is enabled.
Displays whether the adapter is
connected to a wireless network.
Lists the quality of the link connection.
Displays the SSID of the associated
network.
Shows the name of the access point
the wireless adapter is connected to.
Shows the IP address of the access
point the wireless adapter is
connected to.
Lists the speed of the link connection.
Displays the IP address of the
wireless adapter.