Pioneer AVH-Z5200DAB Operation Manual page 34

Menu Item
[Local]
[Off]
FM: [Level1] [Level2] [Level3] [Level4]
MW/LW: [Level1] [Level2]
[FM Step]*1
[100kHz] [50kHz]
[Regional]*2
[On] [Off]
[Alternative FREQ]*2
[On] [Off]
[Auto PI]*1
[On] [Off]
[TA Interrupt]*2
[DAB+RDS TA]
[RDS TA ONLY]
[TA OFF]
[News Interrupt]*2
[On] [Off]
[Tuner Sound]*2
[Talk]
[Standard]
Description
Local seek tuning allows you to only tune into
radio stations with sufficiently strong signals.
NOTES
• [Level4] for FM and [Level2] for MW/LW are available
only with the stations with the strongest signals.
• This setting is available only when [Radio] is
selected as the source.
Select the seek tuning step for the FM band.
NOTE
The tuning step remains at [50kHz] during manual
tuning.
Switches whether the area code is checked
during the Auto PI search.
Allow the unit to retune to a different frequency
providing the same station.
Searches for the same PI (Programme
Identification) code broadcast station from all
frequency bands automatically when the
broadcasting station contains RDS data.
NOTE
Even if you set to [Off], the PI search is automatically
performed when the tuner cannot get a good
reception.
Receives the traffic announcement from the last
selected frequency, interrupting the other
sources.
TIP
The selected setting also applies to [TA Interrupt]
under [DAB settings].
Receives current traffic information for DAB and
RDS (DAB has priority) if available.
Receives current traffic information for only RDS
if available.
Disables this function.
Interrupt the currently selected source with
news programmes.
Switches the sound quality of the FM tuner.
Gives priority to noise prevention.
Gives no effect.
- 34 -