Classification - Avaya ERS 5510 Technical Configuration Manual

Filt

11.2 Classification

Classification consists of adding the following items:
Add IP or L2 or both classifier elements
Add a classifier. As mentioned above in the overview section, a classifier can be made up of one
of the following items:
o
One IP classifier element
o
One L2 classifier element
o
One IP and one L2 classifier element
Optional: Create Classifier Block where a block contains two or more classifier elements. Please
see restrictions below.
When adding a new policy, either a classifier or a classifier block can be assigned to the policy. Since
there is a limit of 15 classification masks available per port, it is advantageous to use Classifier Blocks
whenever possible. Multiple Classifiers can be added to a Classifier Block allowing up to 15 Classifiers
and/or Classifier Blocks per port. By using Classifier blocks, up to a total of 114 classifiers can be applied
to a port.
a) Adding IP and L2 Element
IP Element
To add an IP element, enter the following command:
ERS5500-48T(config)# qos ip-elem ent <1-64000>?
addr-type
ds-field
dst-ip
dst-port-min
flow-id
next-header
protocol
src-ip
src-port-min
<cr>
Example:
ERS5500-48T(config)# qos ip-elem ent 1 src-ip 10.62.32.0/19 dst-ip 10.13.196.0/22
L2 Element
ERS5500-48T(config)# qos l2-element <1-64000>
dst-mac
dst-mac-mask
ethertype
priority
src-mac
src-mac-mask
vlan-min
vlan-tag
<cr>
Example:
ERS5500-48T(config)# qos l2-element 1 src-mac 00-00-0A-00-00-00 src-mac-mask FF-FF-FF-
FF-FF-00 ethertype 0x800
Filters and QOS Configuration for Ethernet Routing Switch 5500
January 2013
Specify the address type (IPv4, IPv6) classifier criteria
Specify the DSCP classifier criteria
Specify the destination IP classifier criteria
Specify the L4 destination port minimum value classifier
criteria
Specify the IPv6 flow identifier classifier crite ria
Specify the IPv6 next header classifier criteria
Specify the IPv4 protocol classifier criteria
Specify the source IP classifier criteria
Specify the L4 source port minimum value classifier criteria
Specify the destination MAC classifier criteria
Specify the destination MAC mask classifier criteria
Specify the ethertype classifier criteria
Specify the user priority classifier criteria
Specify the source MAC classifier criteria
Specify the source MAC mask classifier criteria
Specify the Vlan ID minimum value classifier criteria
Specify the vlan tag classifier criteria
Technical Configuration Guide
avaya.com
41