Getting Started; Installing The Nano-Sim Card And The Microsdxc Card; Charging The Battery - Zte K92 User Manual

Getting Started

Installing the nano-SIM Card and the
microSDXC Card
You do not need to power off your tablet before installing or
replacing the nano-SIM card or before installing or removing the
microSDXC card (not included). You need to unmount the
microSDXC card before removing it (see Connecting to Networks
and Devices – Using the microSDXC Card as Portable or Internal
Storage).
Warning! To avoid damage to the tablet, please only use a
standard nano-SIM card. You can obtain a standard nano-SIM
card from your service provider.
1. Open the nano-SIM/microSDXC card cover on the back of
the tablet.
2. Insert the nano-SIM card into the nano-SIM card slot or the
microSDXC card (not included) into the microSDXC
card slot with the contacts facing down.
3. Close the cover.

Charging the Battery

Your tablet's battery should have enough power for the tablet to
turn on and find a signal. You should fully charge the battery as
soon as possible.
If the battery is low, there will be a pop-up message on the screen.
As you charge your tablet, the screen will tell you the exact battery