Using Earphones - Shure KSA1200 Manual

Analog electrostatic earphone system
Table of Contents

Advertisement

Lithium-ion Rechargeable Batteries
Storing Batteries
To avoid degrading battery health, keep the storage temperature range between 10°C to 25°C (50°F to 77°F).
Battery Repair and Replacement
Lithium-ion batteries have no "memory effect", and instead experience a more linear reduction in capacity. Contact
Shure Service and Repair to replace the battery if you experience any issues.

Using Earphones

Choosing a Sleeve
Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably,
and easy to remove.
Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber.
Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the
ear canal. Hold in place for about ten seconds while the foam expands.
Triple-Flange Sleeves: If desired, use scissors to trim the stem on the sleeve.
Wearing the Earphones
1. Carefully insert the earphone into the ear like an earplug, so that a tight seal is formed.
Important: If there is a lack of low frequency response (bass), the earphone sleeve may not be forming a prop-
er seal. Gently push the earphone deeper into the ear canal or try using a a different sleeve.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
2. Wear earphone cables over the back of the ear to keep them in place during physical activity. Guide the cable
down either the front or back of the body, and use the cable cinch to tighten up the remaining slack.
The fit of the earphone can greatly affect sound quality.
Shure Incorporated
6/12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kse1200sys

Table of Contents