Bulkhead Receptacles
.180
Flat of mounting surface is aligned
with body hex as shown.
Crimp tool
Torque Wrench
Capping Press
APPLIED ENGINEERING PRODUCTS
(203) 776-2813 • FAX (203) 776-8294
Mounting Dimensions
.195 dia.
Assembly Tooling
TA-0105
TA-0436
DESCRIPTION
Capping tool (arbor press) with base for
SMC right angle plugs
Capping tool (arbor press) with base for
SMC right angle jacks
CP-1
P.C. Board Receptacles
.067 dia. min. (typ.)
DESCRIPTION
Crimp tool with .105" and .128" hex dies
DESCRIPTION
Torque wrench with 7/32" jaws for SMC
connector backnuts; 95 inch-ounces torque
Torque wrench with 7/32" jaws for SMC
coupling nuts; 3 inch-pounds torque
www.aepconnectors.com • aepsales@aepconnectors.com
.047 dia.
AEP P/N
TA-0105
AEP P/N
CP-7
CP-8
.100 typ.
.200 typ.
AEP P/N
TA-0436
TA-0398
8