Table of Contents
Advertisement
On/Off Buttons – control for each of the corresponding rear
socket. Press and hold for 3 seconds to setup up the
Remote/local control for each of the corresponding rear
socket. If you installed an optional NT card inside the
ePowerSwitch, there is a delay time for the corresponding
outlet of the NT card to off the power for the safe shutdown
functionality. The default delay time is set up as 3 minutes.
RJ 11 Jacks
iLink Port – Daisy chain to the another ePowerSwitch client
(without NIC).
Ring On/Reset Port – Connect to telephone line for
telephone On/Reset control.
Communication Port – Native support on Microsoft NT 4
and 2000 UPS driver. All ports are functional default.
3
Advertisement
Table of Contents
