Specifying Interfaces Attached To A Multicast Router - SMC Networks TIGERSWITCH 10/100 Management Manual

Specifying Interfaces Attached to a Multicast Router

Depending on your network connections, IGMP snooping may not
always be able to locate the IGMP querier. Therefore, if the IGMP
querier is a known multicast router/switch connected over the
network to an interface (port or trunk) on your switch, you can
manually configure that interface to join all the current multicast
groups. This can ensure that multicast traffic is passed to all the
appropriate interfaces within the switch.
Command Attributes
• Interface – Activates the Port or Trunk scroll down list.
• VLAN ID – Selects the VLAN to propagate all multicast traffic
coming from the attached multicast router/switch.
• Port or Trunk – Specifies the interface attached to a multicast
router.
Web – Click IGMP, Static Multicast Router Port Configuration.
Specify the interfaces attached to a multicast router, indicate the
VLAN which will forward all the corresponding multicast traffic,
and then click Add. After you have completed adding interfaces to
the list, click Apply.
M C
ULTICAST ONFIGURATION
2-91