Bosch SHE44C Use And Care Manual page 8

Preparing and Loading the Dishware
Loading the Top Rack
Figures 1 and 2 show typical mixed loads for the
top rack.
10 place setting
12 place setting
Top Rack Accessories
Top Rack Flip Tines
Flip Tines fold down to make loading the racks
easier in
some
instances.
Grasp the
tines as
shown in
Figure 3
and fold
the tines
downward.
When the top rack is loaded, push it into the
dishwasher.
NOTE: When pushing the top rack into the
dishwasher, push it until it stops against the back
of the tub so the top rack spray arm will connect
to the water supply. Do not push the top rack with
the door.
6
Figure 1
Figure 2
Figure 3
(continued)
Top Rack Height Adjustment
Remove the empty upper rack by pulling it out of
the dishwasher to the point that it can be lifted
upward, as shown in Figure 4.
Pull the rack outward and up until the rollers are
completely free of the roller guides.
Re-insert the rack with the other set of rollers on
the roller guides, as shown in Figure 5.
Figure 4
Loading the Bottom Rack
Place large items in the bottom rack. Load pots
and pans upside-down. Figures 6 and 7 show
typical mixed loads for the bottom rack.
Figure 6
10 place setting
Figure 7
12 place setting
Figure 5