Bosch SHE44C Use And Care Manual page 13

Operating the Dishwasher
Activation of Cycle Options/
Features
Available Cycle Options
x
SHE53L0 x
x
SHE46C0 x
x
SHE44C0
x
SHU43C0
SHE56C0
x
SHE47C0 x
x
SHX46L1 x x
SHX43E0
SHX46A0 x
SHV46C1 x
SHE56C1
x
Activation of Cycle Options/
Features
Half Load
In the Power Scrub Plus, Regular and Auto Wash
cycles you can reduce the energy and water con-
sumption when washing small, lightly soiled loads
that fi ll approximately half of the dishwasher's
capacity. To activate, select the Half Load button
in addition to the Power Scrub Plus, Regular or
Auto Wash cycle button.
Top Rack Only
This option allows you to save energy and water
by washing loads small enough to fi ll the top rack
only. To activate, select the Top Rack Only button
in addition to a cycle. When using the Top Rack
Only feature, dishes should only be loaded in the
top rack.
Extra Dry Heat
With this option you can raise the temperature
of the rinse water and increase the drying time
which will result in improved drying.
To activate:
· Press and hold the left "Cancel Drain" button,
then press and hold the On/Off button.
x
19h
x
19h
x
x
19h
x
24h
x
19h x
x
x
x
x x
19h
(continued)
· When the LED display shows a "00" or a "01"
release both buttons.
· To enable the Additional Drying Heat, press
the left "Cancel Drain" button until the LED
display shows a "01".
· To disable the Additional Drying Heat, press
the left "Cancel Drain" button until the LED
display shows a "00".
· Press the On/Off button to save the setting.
Delay Start
This option allows you to delay the start time of
your dishwasher.
To activate:
· Turn the dishwasher on.
· Select the desired wash cycle.
· Press the Delay Start button until the desired
delay time is shown in the display window.
The Cycle Completion Signal
This Cycle Completion Signal is a tone that
sounds to alert you when your dishwasher
fi nishes washing and drying your dishes. You can
either disable the tone or set the volume.
To activate:
· Press and hold the right "Cancel Drain" button
then press and hold the On/Off button.
· When the light on the "Cancel Drain" button
you are pressing illuminates and the tone
begins to sound, release both buttons.
· Press the right-most "Cancel Drain" button
until the tone is either at the desired volume
or is silent.
· Press the On/Off Button. The Cycle
Completion Signal is now set.
OPTIDRY™
This feature senses when the unit is low on rinse
agent and automatically increases the drying
time. For best performance, always use a liquid
rinse agent even if your detergent contains a
drying additive.
Child Lock
The Child Lock feature allows you to disable the
dishwasher control panel to prevent accidental
activation. To activate this feature press and hold
the button labeled "Child Lock" for 4 seconds
and the "Child lock" indicator light will illuminate.
To disable the feature, press and hold the "Child
Lock" button for 4 seconds.
11