Slant/Fin Lynx LX-85A User's Information Manual
  1. Manuals
  2. Brands
  3. Slant/Fin Manuals
  4. Boiler
  5. VICTORY II VHS Series
  6. User's information manual

Slant/Fin Lynx LX-85A User's Information Manual

Direct-vent sealed combustion condensing boiler
Hide thumbs Also See for Lynx LX-85A:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation & Operation, Instructions for Using
User's Information Manual
Lynx Direct-Vent Sealed Combustion Condensing Boiler
• Before operating this boiler, READ this manual.
• DO NOT attempt to install, service or repair this boiler yourself. There are no user serviceable
parts. Contact a qualified service agency if your boiler needs repair or maintenance. Ask your gas supplier for a
list of qualified service agencies.
• A qualified service agency should inspect the venting system of this boiler on an annual basis.
Your gas boiler must be installed and serviced by a qualified service agency or gas
supplier. The lack of proper service can result in a dangerous condition.
This manual must be left with owner, hung on or
adjacent to the boiler. Owner should retain manual
for future reference.
Residential • Gas fired • Hot Water Boilers
Model LX-85A
FOR YOUR SAFETY:
WARNING: If the information in this manual is not
followed exactly, a fire or explosion may result
causing property damage, personal injury or loss
of life.
__
DO NOT store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
__
WHAT TO DO IF YOU SMELL GAS
• DO NOT try to light any appliance.
• DO NOT touch any electrical switch
• DO NOT use any phone in your
building.
• Immediately call your gas supplier
from a neighbor's phone. Follow the
gas supplier's instructions.
• If you cannot reach your gas supplier,
call the fire department.
__
Installation and service must be performed by
a qualified installer, service agency or the gas
supplier.
Printed in U.S.A. 1008
Publication No. LXA-UIM
Part No. 84-5757000

Advertisement

Table of Contents
loading

Related Manuals for Slant/Fin Lynx LX-85A

Summary of Contents for Slant/Fin Lynx LX-85A

  • Page 1 • DO NOT attempt to install, service or repair this boiler yourself. There are no user serviceable parts. Contact a qualified service agency if your boiler needs repair or maintenance. Ask your gas supplier for a list of qualified service agencies.

  • Page 2: Lighting Instructions

    Figure 1. Location and identification of parts. WELCOME TO OUR VALUED CUSTOMER You are now the owner of a Slant/Fin Lynx gas-fired boiler, another quality heating product designed and manufactured by an industry leader, to provide your family with many years of reliable comfort and trouble-free performance.
  • Page 3 The user should make the following inspections at least once each month during the heating season and once just before cold weather starts. Lynx LX-85A boiler may be installed and vented either as direct-vent boiler, which all air for combustion is obtained directly from outside...
  • Page 4 Lynx Model LX-85A Figure 4. Non-direct vent, sidewall venting.
  • Page 5 Lynx Model LX-85A Figure 5. Non-direct vent, venting through the roof. Figure 6. Non-direct vent, utilizing an existing chimney as a chase.

  • Page 6: Condensate Removal System

    Lynx Model LX-85A Figure 7. Condensate disposal system 2. CONDENSATE REMOVAL SYSTEM The Lynx LX-85A boiler is equipped with a built-in con- densation drain and trap. The trap must be filled with water. DO NOT operate the boiler without filling the trap with water to prevent flue gas discharge into space.

  • Page 7: Safety Information

    Below is a list of products which must be avoided from being stored or entering the boiler room or air supply area: PRODUCTS TO AVOID •...

  • Page 8: Integrated Boiler Control

    Diagnostic information is also provided on the display, to help determine the cause of boiler failure. (See Figure 9). BOILER CONTROL AND DISPLAY FEATURES (See Figure 9) A.
  • Page 9 Blinking dot on “Mode Display” indicates active heating control, burner off. Steady dot indicates burner is on. *: Error must be corrected to resume boiler operation. Pressing the “Reset” button is not required. **: The boiler circulator is energized, when boiler water temperature drops below 50˚F.
  • Page 10 Lynx Model LX-85A Table 2: Viewing and Changing Temperatures Press “Select” button for viewing different modes on “Mode Display” Mode Table 1 Table 2 Display Table 1 Table 2 Table 1 Table 2 Blinking Blinking Table 1 Table 1 Table 1 Table 1 Blinking Table 1...
  • Page 11 DIAGNOSTIC ERROR CODES WARNING: If an operational problem has occurred, the boiler will shut off and show an “A”, “E” or “H” in the mode display, along with an error code in the temperature display. Do not attempt performing any service under these conditions, but do note the mode and temperature dis- play indication, in case the problem clears itself.
  • Page 12 ©Slant/Fin Corp. 2008 SLANT/FIN CORPORATION, Greenvale, N.Y. 11548 • Phone: (516) 484-2600 FAX: (516) 484-5921 • Canada: Slant/Fin , Mississauga, Ontario LTD/LTEE www.slantfin.com...

Table of Contents