Specifications - LG AN110B Service Manual

SPECIFICATIONS

NOTE : Specifications and others are subject to change without notice for improvement.
Scope
A
This standard can be applied to the DLP Projector(chassis : RE-058A) related to AN110B/W-JD Model.
Test Condition
A
1) Temperature : 25°C ± 5°C (Only CST is 40°C ± 2°C )
2) Relative Humidity: 65 ± 10%
3) Power Voltage: Standard input voltage (100-240V~, 50/60Hz)
4) Use only parts designated in B.O.M.,PARTS SPEC.,or drawings.
5) Follow each drawing or spec for spec and performance of parts,based upon P/N of B.O.M
6) Warm up projector for more than 30min. before the measurement.
Test and Inspection Method
A
1) performance:Follow the Standard of LG TV test
2) RCA JACK performance: Follow the standard of LG
3) Standards of extra requirement
SAFETY:CB(EN55013), Electric wave:CE(EN55020)
General Specification
A
No.
1 Video input applicable system
2 Power
3 Input Voltage
4 Market
5 Screen size
6 Aspect ratio
7 Operating Temperature
8 Operating Humidity
9 Storage Temperature
10 Storage Humidity
Item
NTSC M
NTSC 4.43
PAL
PAL M
PAL N
SECAM
NTSC-PB
SMPS
100V(-10%) - 240(+6%)V~, 50/60Hz
World wide
16:9/ 4:3
16:9
0
-20
Specification
Min Typ Max
40
85
60
85
- 11 -
Remark
Unit
3.579545 / 60Hz
4.433618 / 60Hz
4.433618 / 50Hz
3.575611 / 60Hz
3.582056 / 50Hz
4.286 / 50Hz
4.433618 / 60Hz
deg
%
deg
%