FOR SERVICE TECHNICIAN ONLY - DO NOT REMOVE OR DESTROY
5. Press the option buttons, one at a time, to check the User Interface.
Whirlpool model
Maytag model
6. The following steps are automatically driven, or they can be manually advanced by pressing the Cancel/Drain button twice. See the
Universal Diagnostics Test chart on page 6.
NOTES:
I To cancel out of this mode, rotate the cycle control knob (this exits the program).
I Press CANCEL/DRAIN twice to advance to the next step of the procedure.
I If the starting procedure fails, turn the cycle control knob back to the CLEAN WASHER cycle, then repeat the starting procedure.
PAGE 5