Appearance and main components
Printer front (take-up side)
• Front cover
Must be closed during printing.
• Maintenance area cover
Open to perform print head
maintenance.
• Media clip (option)
After cutting the media,
clip it to not let it fall.
• Media cutter blade (option)
It cuts the media.
• Cutter unit (64) (option)
• Output paper guide
Contains the afterheater that dries ink.
30
• Take-up reel unit
Winds the printed media.
• Pressure roller lever
This lever fixes or releases the media.
• Guide bar
Guides the media in loose mode.
Large capacity ink system (LCIS)
• Operation panel
Equipped with LEDs and LCD to display
the printer status, and buttons to set
functions.
• Capping unit cover
Opened when cleaning the capping
unit or the carriage.
• Waste ink bottle
• LCIS unit
Open the drawer to install the ink
bottles.
• Chip reader
To be used with the ink amount extension chip.
• Take-up direction switch
Sets the media take-up direction.
Inner take-up
Winding o
Outer take-up