Table of Contents
Advertisement
F. SUSPENSION & DRIVELINE INSTALLATION
DAMPER BAG
Shock Assemblies
Silicone Shock Oil
Front Shock Springs
(white stripe)
Rear Shock Springs
(orange stripe)
Upper Spring Retainers
Lower Spring Retainers
ACCESSORY
Option Part
8140 Long Arm Lift Kit
8140R Long Arm Lift Kit
8140X Long Arm Lift Kit
Option Part
8042 Springs (0.22)
8043 Springs (0.30)
8044 Springs (0.39)
8045 Springs (0.61)
Aluminum Accessory
8260A Shocks
(blue-anodized)
8260G Shocks
(green-anodized)
8260R Shocks
(red-anodized)
8260X Shocks
(hard-anodized)
32 • TRX-4 SPORT
F1. Assemble GTS shocks
1
2
Fill with
shock oil
Unscrew
cap
GTS Shock Exploded View
Shock Cap
Upper Spring
Retainer
Shock
Note: Install upper
Spring
spring retainer
before shock cap
Lower Spring
Retainer
3
Slowly move
piston to remove
excess air
Exercise shock to make sure it compresses fully. If it does not, it is overfilled.
Suggested Spring Preload Settings (May require fine tuning when body installed)
5mm
9mm
White Stripe
(Front Shock
Springs)
Left Front Shock
Right Front Shock
Assembled
Assembled
4
5
6.7mm
(0.26")
Note: Shaft
Add oil to reach
should be fully
the proper level
compressed when
cap is installed.
5mm
Orange Stripe
(Rear Shock
Springs)
Left Rear Shock
Right Rear Shock
Assembled
Assembled
x4
5mm
Hide quick links:
Advertisement
Table of Contents
