Hardware Descriptions; Icon Descriptions - Traxxas TRX4 Sport Assembly Manual

INTRODUCTION

HARDWARE DESCRIPTIONS

The following chart is provided to help you identify the many different sizes and types of hardware that are used in the
assembly of this model. Note the difference between the length measurements of the roundhead and countersunk screws.
A ruler is provided at the bottom of each page to measure the length of the screws in millimeters.
3x12mm Countersunk Screw
12mm
CCS
Countersunk Cap Screw
CS
Cap Screw
FCS Flathead Cap Screw
BCS
Buttonhead Cap Screw
NL
Nylon Locknut

ICON DESCRIPTIONS

There are icons in these assembly instructions that indicate certain actions needed during assembly.
Grease Tube
Apply included
grease to part
indicated.
White: Silicone
Dark: High Performance
Repeat Icon
x2
Repeat step the number
of times indicated.
x4
6 • TRX-4 SPORT
3x12mm Buttonhead Screw
3mm
3mm
12mm
GS
Set (Grub) Screw
PTW PTFE Washer
MW Metal Washer
E
E-Clip
BB
Ball Bearing
Turn Icon
Indicates assembly
needs to be flipped
or turned around.
Optional Part Icon
Optional part available.
Refer to included
parts list.
5x10x4mm Ball Bearing
10mm 5mm
4mm
Oil Bottle
Use included
silicone shock oil.
Aluminum Part Icon
Aluminum accessory
part available. Refer to
included parts list.