Fuel Filter - Echo Pro Attachment Series Operator's Manual

MAINTENANCE

Fuel Filter

Level 1.
Parts Required: Tune-Up Kit
Fuel is VERY flammable. Use extreme care when mixing, storing
or handling, or serious personal injury may result.
1. Use a clean rag to remove
loose dirt from around fuel cap
and empty fuel tank.
Do not damage fuel line while removing fuel filter from tank.
2. Pull the fuel filter from the fuel tank.
3. Do not remove the wire coil clamp to remove the fuel filter. Pinch the
fuel filter with the fingers on one hand and the fuel line just below the
clamp with the other hand. Pull and twist slightly to separate.
4. Install the new fuel filter with reverse action.
Note: Federal EPA regulations require all model year 2012 and later
gasoline powered engines produced for sale in the United
States to be equipped with a special low permeation fuel
supply hose between the carburetor and fuel tank. When
servicing model year 2012 and later equipment, only fuel
supply hoses certified by EPA can be used to replace the
original equipment supply hose. Fines up to $37,500.00 may
be enforced for using an non-certified replacement part.
34
PAS-225
X7732274001
© 02/2019 ECHO Inc.