Blade Selection - Echo Pro Attachment Series Operator's Manual

PAS-225
Pro Maxi-Cut
Grass/Weed
Blade
Shield with
cutoff knife
Upper Plate &
Flat Washer
*ANSI standards require brush cutters be equipped with a barrier bar or
restrictive harness. U-Handle ensures a higher safety factor.
Do Not install blades on GT (Curved Shaft) model trimmers.
• Arbor diameter of upper blade plate must match arbor diameter of blades.
• A new cotter pin is required each time a blade is installed.
• Brushcutters over 7.5 kg (16.5 lbs.) dry weight (without fuel) require a
double shoulder harness.
Note: The barrier bar is used to restrict rearward movement
of the unit. The barrier bar is not a handle and should
not be gripped when using or carrying the unit.

Blade Selection

The type of blade used MUST be matched to the type and size of
material cut. An improper or dull blade can cause serious
personal injury. Blades MUST be sharp. Dull blades increase the
chance of kick-out and injury to yourself and bystanders. Never
use an edging blade, circular saw blade, or any other type of
unapproved blade.
X7732274001
© 02/2019 ECHO Inc.
Tri-Cut Grass/
Weed Blade
Shield without cutoff knife
Harness
Upper/Lower Blade Plates
Hex Nut
New Cotter Pin
Metal Grass /
Weed Blade
OPERATION
Metal Brush /
Clearing
Blades
23