Power Windows; Hints On Controlling The Interior Climate - Ford TOURNEO CONNECT Quick Reference Manual

The headlamps will switch on and off
automatically in low light situations or
during inclement weather.

POWER WINDOWS

To reduce wind noise or buffeting when just
one window is open, open the opposite
window slightly.
Resetting the Bounce-Back Feature
If you have disconnected the battery, you
must reset the bounce-back memory
separately for each window.
1. Lift and hold the switch until the
window is fully closed.
2. Release the switch.
3. Lift the switch again for one more
second.
4. Press and hold the switch until the
window is fully open.
5. Release the switch.
6. Lift and hold the switch until the
window is fully closed.
7. Open the window and then try to close
it automatically.
8. Reset and repeat the procedure if the
window does not close automatically.
HINTS ON CONTROLLING THE
INTERIOR CLIMATE
General Hints
Note: Prolonged use of recirculated air may
cause the windows to fog up.
Note: To reduce fogging of the windshield
during humid weather, adjust the air
distribution control to the windshield air
vents position. Increase the temperature and
fan speed to improve clearing, if required.
Tourneo Connect (CHC) Long Wheelbase Kombi/Short Wheelbase Kombi, Base/Base High Payload/Titanium/Titanium High Payload/Trend/Trend ECOlite/Trend High Payload
Heating the Interior Quickly
Adjust the fan speed to the highest
speed setting.
Adjust the temperature control to the
highest setting.
Adjust the air distribution control to the
footwell air vents position.
Recommended Settings for
Heating
Adjust the fan speed to the second
speed setting.
Adjust the temperature control to the
midway point of the hot settings.
Adjust the air distribution control to the
footwell and windshield air vents
position.
Cooling the Interior Quickly
Adjust the fan speed to the highest
speed setting.
Adjust the temperature control to the
MAX A/C position.
Adjust the air distribution control to the
instrument panel air vents position.
Recommended Settings for Cooling
Adjust the fan speed to the second
speed setting.
Adjust the temperature control to the
midway point of the cold settings.
Adjust the air distribution control to the
instrument panel air vents position.
4