Tactical Public Safety (Tps) (Conventional Only); Using Tps Normal Transmission; Using Tps Emergency Transmission - Motorola APX 8000XE 1 User Manual

• Press the RSM Side Button 1 if the radio is
connected to RSM.
• Press the PTT button. PTT button must be
configured in CPS to enable this function.
The radio cancels the indications, a tone sounds and
the radio sends an acknowledgment to the command
terminal.
NOTICE:
Move the Volume Control Knob to adjust
the volume of the audible alert from full
volume.
Tactical Public Safety (TPS)
(Conventional Only)
TPS enables the user of a group to identify the start and
the end of a transmission by displaying the caller name or
ID on the radio display.

Using TPS Normal Transmission

At TPS Zone Channel, perform one of the following
actions:
• Press PTT button to transmit. Talk clearly into the
microphone. Release PTT button to listen.
• Receive and listen to call, the radio displays the
caller's name or ID.

Using TPS Emergency Transmission

The following are two important alert tones designed for
this feature.
Emergency Beacon
During Emergency if the TPS radio user pushes the
Emergency button, the radio sounds a Beacon at the
maximum volume of the radio at radio's internal speaker
and it is not adjustable. This beacon goes to silent when
user presses the PTT button for voice transmission.
Emergency Call De-Key Sidetone
The radio sounds an alert tone to remind radio user that
the Emergency Mode is still active after user releases
the PTT button for an Emergency call transmission. The
English
69