Troubleshooting Suspend/Resume
If the terminal does not wake when you press the Power button on the Dolphin 6110, the battery might
be too low to resume operation. To check, remove the battery and install a fully charged battery or
connect the terminal to a Dolphin charging peripheral.
Changing the Memory Allocation
You can adjust file storage vs. program memory in System Properties.
1. Tap Start > Settings > Control Panel > System > Memory tab.
Care and Cleaning of the Dolphin Terminal
When needed, clean the image or laser engine window and the LCD display with a clean, non-abrasive,
lint-free cloth. The terminal can be cleaned with a damp cloth.
3-16