Table of Contents
Advertisement
IMPORTANT ASSEMBLY INFORMATION
Tools Required for Assembly: Electrical Drill
NOTE: It is highly recommended that this equipment is assembled by two or
more people to avoid possible injury.
Ensure all board edges are aligned when screwing boards together.
Ensure to attach the correct Foam Sheet to correct Board.
CARE AND MAINTENANCE
1. Inspect and tighten all parts before using the equipment.
2. The Vinyl Cover can be cleaned using a damp cloth and mild non-abrasive detergent.
DO NOT use solvents.
3. Examine the equipment regularly for signs of damages or wear.
4. Replace any defective components immediately and/or keep the equipment out of use until
repair.
5. Failure to examine regularly may affect the safety level of the equipment.
WEIGHT CAPACITY AND DIMENSION
1. Maximum weight capacity (including user weight) on Box: 250 lbs.
2. Box assembled dimension: 20" x 16" x24".
3. Training Area: 6' x 6' x 10' (L x W x H)
©IMPEX INC.
5
www.marcypro.com
Advertisement
Table of Contents
