Advertisement
4.
Install the apron
!
Lift the bath at least 530mm above the floor, put the
apron right under the bath. The gap side of the
apron should face the overflow side of the bath.
Connect the drain plumbing with the floor drain.
Apply silicone sealant to seal. Set the bath bottom
base evenly into the floating board base, then lay
down the bath slowly.
5. Level the bath and adjust apron gap to about 15mm.
1236577-T01-A
4.
!
Gap side should face the overflow.
5.
Apron Adjustable Feet
-4-
530
15
15
Advertisement
