Advertisement
Quick Links
BEFORE YOU BEGIN
BEFORE YOU BEGIN
A. Introduction
!
Please read these instructions carefully to
familiarize yourself with the required tools, materials,
and installation sequences. Follow the sections that
pertain to your particular installation. This will help
you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
!
All information is based on the latest product
information available at the time of publication.
Kohler Co. reserves the right to make changes in
product characteristics, packaging, or availability at
any time without notice.
!
These instructions contain important care, cleaning,
and warranty information-please leave these
instructions for the consumer.
B. Installer Hazard Notification
CAUTION!! Risk of personal injury.
Cast iron baths are extremely heavy, and need
at least 5 persons for help. Wear appropriate
safety equipment when installing these products.
PRODUCT REQUIREMENTS
PRODUCT REQUIREMENTS
A. Summary Of Key Requirements
!
Observe all local plumbing codes.
!
Install the bath tub to a level floor.
!
Provide properly-dimensioned space.
!
Ensure that the drain locates within the range of the
bath outlet (300 300mm).
!
Make sure the flooring offers adequate support for
your bath.
!
Observe all local plumbing and building codes.
!
Be careful with the painted surfaces of the back of
the bath and its wood surround to avoid scratch
during transportation and installation.
CAUTION: Risk of product or property
damage.
Do not support the bath by the rim.
1236577-T01-A
FREESTANDING CAST IRON BATH, WOOD APRON
A.
!
!
!
B.
A.
!
!
!
!
300
)
!
!
!
368
201419
-1-
LOV E
INSTALLATION INSTRUCTIONS
5
Copyright Kohler China Ltd., 2014
É
K-99206T
(300
, 2014
Advertisement
Related Manuals for Kohler LOVEE
Summary of Contents for Kohler LOVEE
- Page 1 All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.
-
Page 2: Installation Requirements
B. Product Inspection Uncrate and inspect bath for damage. Leave all materials in the crate during construction to prevent damage. Carefully open the wood surround cartons and remove the components and hardware pack. Inspect all the wooden pieces for damage. If you observe any damage, do not install the bath or the wood surround. - Page 3 C. Plumbing Preparation Position the plumbing according to rough-in dimensions. Check the supplies for leaks. INSTALL THE FREESTANDING BATH INSTALL THE FREESTANDING BATH 1. Lift the bath from the package base and place it to the predetermined position. Install the adjustable feet to level the bath.
- Page 4 Install the apron Lift the bath at least 530mm above the floor, put the apron right under the bath. The gap side of the apron should face the overflow side of the bath. Connect the drain plumbing with the floor drain. Apply silicone sealant to seal.
-
Page 5: Install The Plumbing
CAUTION: Risk of product or property damage. Do not support the bath by the rim. Provide adequate support under the feet. Note: Do not move the bath by its wood surround. INSTALL THE PLUMBING INSTALL THE PLUMBING NOTE: Provide access to all plumbing connections to simplify future maintenance. -
Page 6: Important Consumer Information
Kohler bathtubs. NOTICE: All housekeeping and maintenance employees must be trained in the proper cleaning of Kohler bathtubs. Post a copy of this notice in a readily- visible location. DO NOT use steel wool, wire brushes, metal scrapers or abrasive sponge pads to clean a Kohler bath tub.