Cisco WRP500 Administration Manual page 39

Chapter 3 Configure Voice Services
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8, <:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx
| 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 )
• Extensions on your system
EXAMPLE: (
xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 )
[1-8]xx
system uses four-digit extensions, you would instead enter the following string: [1-8]xxx
• Local dialing with seven-digit number
EXAMPLE: ( [1-8]xx |
xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]111)
9, xxxxxxx
number, as in a local call.
• Local dialing with 3-digit area code and a 7-digit local number
EXAMPLE: ( [1-8]xx | 9, xxxxxxx |
xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 )
9, <:1>[2-9]xxxxxxxxx
presses 9, an external dial tone sounds. The user must enter a 10-digit number that begins with a
digit 2 through 9. The system automatically inserts the 1 prefix before transmitting the number to
the carrier.
• Local dialing with an automatically inserted 3-digit area code
EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx |
xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 )
8, <:1212>xxxxxxx
the majority of calls go to one area code. After the user presses 8, an external dial tone sounds. The
user can enter any seven-digit number. The system automatically inserts the 1 prefix and the 212
area code before transmitting the number to the carrier.
• U.S. long distance dialing
EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8, <:1212>xxxxxxx |
xxxxxxxxx
9, 1 [2-9] xxxxxxxxx
11-digit number that starts with 1 and is followed by a digit 2 through 9.
• Blocked number
EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8, <:1212>xxxxxxx | 9, 1 [2-9]
xxxxxxxxx |
9, 1 900 xxxxxxx !
that are associated with high tolls or inappropriate content, such as 1-900 numbers in the U.S.. After
the user press 9, an external dial tone sounds. If the user enters an 11-digit number that starts with
the digits 1900, the call is rejected.
• U.S. international dialing
[1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8, <:1212>xxxxxxx | 9, 1 [2-9]
Allows a user dial any three-digit number that starts with the digits 1 through 8. If your
9, xxxxxxx
After a user presses 9, an external dial tone sounds. The user can enter any seven-digit
This example is useful where a local area code is required. After a user
This is example is useful where a local area code is required by the carrier but
| 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 )
After the user presses 9, an external dial tone sounds. The user can enter any
9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 )
This digit sequence is useful if you want to prevent users from dialing numbers
| 9, <:1>[2-9]xxxxxxxxx | 8, <:1212>xxxxxxx | 9, 1 [2-9]
9, <:1>[2-9]xxxxxxxxx | 8, <:1212>xxxxxxx | 9, 1 [2-9]
Cisco WRP500 Administration Guide
Configure Dial Plans
8, <:1212>xxxxxxx | 9, 1 [2-9]
9, 1 [2-9]
3-13