Dodge Grand Caravan 2019 Owner's Manual page 229

Frequently Asked Questions About Installing Child Restraints With Seat Belts
What is the weight limit
(child's weight + weight of
the child restraint) for using
the Tether Anchor with the
seat belt to attach a forward
facing child restraint?
Can the rear-facing child re-
straint touch the back of the
front passenger seat?
Can the rear head restraints
be removed?
Can the buckle stalk be
twisted to tighten the seat
belt against the belt path of
the child restraint?
Weight limit of the Child
Restraint
Yes
Yes
Yes – Cinching Latch Plate
No – ALR
Always use the tether anchor when using the seat belt
to install a forward facing child restraint, up to the
recommended weight limit of the child restraint.
Contact between the front passenger seat and the
child restraint is allowed, if the child restraint manu-
facturer also allows contact.
The 2nd row bench seating head restraints are remov-
able if they interfere with the installation of the child
restraint. The 2nd row stow n' go head restraints are
not removable. The 3rd row center head restraint is
removable in all vehicles, but the 3rd row outboard
head restraints are not removable. Refer to "Head Re-
straints" in "Getting To Know Your Vehicle" for fur-
ther information.
In positions with cinching latch plates (CINCH), the
buckle stalk may be twisted up to 3 full turns. Do not
twist the buckle stalk in a seating position with an
ALR retractor.
SAFETY 227
5