Dodge Grand Caravan 2019 Owner's Manual page 145

function and operating information. To make your selec-
tion, push and release the right arrow button until "ON" or
"OFF" appears.
Flashers With Sliding Door
When this feature is selected, the signal lamps activate
when power or manual sliding doors are in operation,
signaling other drivers that someone may be exiting or
entering the vehicle. To make your selection, push and
release the right arrow button until a check-mark appears
next to the feature showing the system has been activated
or the check-mark is removed, showing the system has
been deactivated.
Tilt Mirror In Reverse — If Equipped
When this feature is selected and the vehicle is placed in a
reverse gear, the driver's side mirror will tilt downward to
allow the driver to see into the previous blind spot and
avoid objects in close proximity to the rear of the vehicle.
To make your selection, push and release the right arrow
button until a check-mark appears next to the feature
showing the system has been activated, or the check-mark
is removed showing the system has been deactivated.
GETTING TO KNOW YOUR INSTRUMENT PANEL 143
Blind Spot Alert — If Equipped
There are three selections when operating Blind Spot Alert
("Blind Spot Alert Lights," "Blind Spot Alert Lights/
CHM," and "Blind Spot Alert Off"). The Blind Spot Alert
feature can be activated in "Blind Spot Alert Lights" mode.
When this mode is selected, the Blind Spot Monitor (BSM)
system is activated and will only show a visual alert in the
outside mirrors. The Blind Spot Alert feature can be
activated in "Blind Spot Alert Lights/CHM" mode. In this
mode, the Blind Spot Monitor (BSM) will show a visual
alert in the outside mirrors as well as an audible alert when
the turn signal is on. When "Blind Spot Alert Off" is
selected, the Blind Spot Monitor (BSM) system is deacti-
vated.
To make your selection, push and release the right arrow
button until a check-mark appears next to the feature,
showing the system has been activated, or the check-mark
is removed, showing the system has been deactivated.
NOTE: If your vehicle has experienced any damage in the
area where the sensor is located, even if the fascia is not
damaged, the sensor may have become misaligned. Take
your vehicle to an authorized dealer to verify sensor
alignment. Having a sensor that is misaligned will result in
the BSM not operating to specification.
4