Mobile Calling Functions
Functions
Receiving a Call/
Hanging Up
Making a Call
Redial
Voice Dial
Switching Calls
Receiving a Call
While on the Phone
Rejecting a Call
Enabling/Disabling
Mute
CAUTION: Do not disable/enable mute while driving, as changing this setting requires both hands.
NOTE: The Voice Dial and Redial functions work on the Main Connected Device or on the device
on which you made the last call. (The Voice Dial and Redial functions may work differently
depending on the mobile phone being used.)
Description
Briefly press the Call button.
If you want to turn off the Vibration function of the product, briefly slide the
Volume jog switch in the volume down (-) direction.
If you make a call using a mobile phone, the call is automatically connected
to the HBS-910.
On some mobile phones, you should briefly press the Play/Pause/Stop button
twice to switch calls.
Press and hold the Call button for more than 1 second to place a call to the
last number you called.
Briefly press the Call button.
If the mobile phone does not support the Voice Dial function, you can use the
Redial function.
Briefly press the Play/Pause/Stop button twice during a call.
(Every time you press one of these buttons, the call switches to the mobile
phone or the HBS-910.)
You can receive another call while on the phone by pressing and holding the
Call button for 1 second.
The existing call switches to call waiting status. Press and hold the Call button
again for 1 second to switch back to the previous call.
Briefly press the Call button to hang up in the middle of a call or to hang up
both calls. (This feature works differently depending on the mobile phone settings.)
Press and hold the Call button for 2 seconds.
Simultaneously slide and hold the Volume jog switch in the volume up (+)
direction, and slide and hold the Previous/Next jog switch in the
for 1 second.
position
7