Approved Kombiengines - Stihl FS-KM Instruction Manual

MAINTENANCE, REPAIR AND
STORING
WARNING
Always stop the engine and make sure
that the cutting attachment is stopped
before doing any maintenance or repair
work or cleaning the power tool. Do not
attempt any maintenance or repair work
not described in your instruction manual.
Have such work performed by your
STIHL servicing dealer only.
WARNING
Use only identical STIHL replacement
parts for maintenance and repair. Use of
non-STIHL parts may cause serious or
fatal injury.
Wear gloves when handling or
performing maintenance on blades.
WARNING
Never repair damaged cutting
attachments by welding, straightening or
modifying the shape. This may cause
parts of the cutting attachment to come
off and result in serious or fatal injuries.
Keep blades sharp. Tighten all nuts,
bolts and screws, except the carburetor
adjustment screws, after each use.
Do not clean your machine with a
pressure washer. The solid jet of water
may damage parts of the machine.
Store the power tool in a dry and high or
locked location out of reach of children.
FS-KM

Approved KombiEngines

KombiMotors
Only use KombiMotors supplied or
explicitly approved by STIHL for use with
the attachment.
Depending on the cutting attachment
used, always refer to and observe the
chapter on "Approved Combinations of
Cutting Attachment, Deflector, Handle
and Harness".
This Kombi attachment may be operated
only in combination with the following
KombiMotors:
STIHL KM 56 R, KM 91 R, KM 94 R,
KM 111 R, KM 131 R, KMA 130 R
WARNING
Loop-handled machines must be
equipped with a barrier bar.
English
13