ZXR10 WAS (V1.0) W140A Outdoor Wireless Access Point / Bridge
Lightning
protection ground
2.4 Power-on and Power-off
The W140A accepts power supply over Ethernet. The W140A is equipped with a
built-in PoE module. It is connected to the PoE interface in the W201P, the PoE
terminal, through the PoE cable attached with the W140A.
To power on the W140A, follow the steps below:
Professional Installation Instruction Manual
Lightning arrestor
Insulation
Antenna
W140A
Antenna
feeder
combined at the case
Fig. 2.3-8 The Grounding System of the W140A
Work ground and
surge ground
2-24
Control
room
W201P
Insulating transformer
AC power network
Shared by working
ground and surge
protection ground