Ryobi CSS1000 Owner's Operating Manual page 12

■ CUTTING LARGER WORKPIECES WITH
SLIDE ACTION
When cutting large workpieces with the slide action,
the workpiece is placed squarely against the rear
fence and is firmly locked in the vice.
Grasp the saw handle firmly, press down the lock-off
switch and depress the trigger switch. (Fig 25)
Fig 25
Slide the cutting head away from the rear fence to
the outermost position. (Fig 26)
Slowly lower the blade into and through the
workpiece and push the blade through the timber
towards the rear fence. (Fig 27)
Fig 27
Fig 26
Page 12
WARNING:
Never place undue force
on the saw handle in a
right or left direction as
this will misalign the head
and result in an inaccurate cut.