Kenwood KDC-BT730DAB Instruction Manual page 11

GETTING STARTED
[SOURCE SELECT]
[SPOTIFY SRC] [ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ; [OFF]: Disables.
(Page 13)
[BUILT-IN AUX] [ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 12)
[P-OFF WAIT] Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in standby
mode) to save the battery.
[20M]: 20 minutes ; [40M]: 40 minutes ; [60M]: 60 minutes ; [– – –]: Cancels
[CD READ] [1]: Automatically distinguishes between audio file disc and music CD. ;
[2]: Forces to play as a music CD. No sound can be heard if an audio file disc is
played.
[F/W UPDATE]
[UPDATE SYSTEM]/[UPDATE DAB]
[F/W UP xxxx]/ [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not
[F/W UP xxxxx] activated).
For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.
[FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels.
[CLOCK]
[CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is turned off. ;
[OFF]: Cancels.
[ENGLISH]
Select the display language for [FUNCTION] menu and music information if
[РУССКИЙ]
applicable.
[ESPANOL]
By default, [ENGLISH] is selected.
[FRANCAIS]
Change the crossover type
Press B SRC repeatedly to enter STANDBY.
1
2 Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then press
the knob.
4
Turn the volume knob to select "YES" or "NO", then press the
knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, see page 22.
Caution
Select a crossover type according to how the speakers are connected.
(Page 33, 34)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.
ENGLISH
5