Maintenance Safety And Emergency Procedures; Standby Status; Inching Button - HP Indigo press 3050 User Manual

All interlocked doors have visual indications when they are open. The door and interlock
warning indicators appear in the control panel and in the schematic window, which shows
all open doors.
Figure 3-5. Interlocks window

Maintenance safety and emergency procedures

Standby status

Put the press in Standby when the system is not required to print or when the system is
unattended. The unit automatically goes into Standby after it remains idle for more than
20 minutes.

Inching button

Use the Inching button in maintenance procedures that require inching the drums. If any
interlocked doors are open, the machine returns to the off state. The Inching button
(located at the side of the door) is enabled when the paper feed door or the paper exit
door is opened. Opening both the feed and exit doors disables inching. During inching,
the machine is in Standby.
Figure 3-6. Feed-side Inching button
ENWW
Interlock indicators
Inching button
Maintenance safety and emergency procedures 31