Siemens SIMATIC S7-1500 Manual page 12

Product overview
2.1 Properties
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Isochronous mode
Calibration in runtime
Module internal Shared Input (MSI)
Configurable submodules / submod-
ules for Shared Device
Oversampling
You can configure the module with STEP 7 (TIA Portal) and with a GSD file. The
oversampling function requires isochronous mode and can therefore only be configured with
STEP 7 (TIA Portal).
Accessories
The following accessories are supplied with the module and can also be ordered separately
as spare parts:
● Shield bracket
● Shield terminal
● Power supply element
● Labeling strips
● U connector
● Universal front door
Other components
The following component can be ordered separately:
Front connectors, including potential jumpers and cable ties
You can find additional information on accessories in the S7-1500/ET 200MP
(http://support.automation.siemens.com/WW/view/en/59191792) system manual.
12
Firmware version
of the module
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V2.0.0 or higher V13 Update 3 or higher
(PROFINET IO only)
V2.0.0 or higher V13 Update 3 or higher
(PROFINET IO only)
V2.1.0 or higher V14 or higher and HSP 0186
(PROFINET IO only)
Configuration software
STEP 7
(TIA Portal) (TIA Portal) V12 or higher,
V12 or higher
V12 or higher
V12 or higher
V12 or higher
V12 or higher
Analog Input Module AI 8xU/I HS (6ES7531-7NF10-0AB0)
Manual, 12/2016, A5E03484886-AE
GSD file in STEP 7
or STEP 7 V5.5 SP3 or
higher
--- / X
X
X
---
X
X
(PROFINET IO only)
X
(PROFINET IO only)
---