Related Manuals for Capresso EC50
Summary of Contents for Capresso EC50
- Page 1 EC O Stainless Steel Pump Espresso & Cappuccino Machine Model #117 • Instructions • Warranty...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electrical shock or personal injury, do not immerse cord, plugs or appliance in water or other liquid. -
Page 3: Table Of Contents
TABLE OF CONTENTS Page Important Safeguards ................... 2 Reference Images ..................4 1. The Capresso EC50 Espresso/Cappuccino Machine ......5 2. Before Using for the First Time ..............5 3. Filling the Water Container ............... 5 4. Control Panel .................... 5 5. -
Page 4: Reference Images
Fig. 1 Capresso EC50 User Components a. Removable Cup Warming Tray n. Ready indicator b. Removable Water Tank p. Measuring Scoop with Tamper (not c. Steam Wand shown) d. Black Frothing Sleeve (removable) Fig. 3 e. On/Off Switch f. Removable Drip Tray g. -
Page 5: The Capresso Ec50 Espresso/Cappuccino Machine
EC50 will produce the absolute freshest and most aromatic cup of “crema” coffee possible. Not only will your EC50 make perfect espresso, but in seconds the easy to use frothing system can add frothed milk to your espresso and turn it into a delicious cappuccino. -
Page 6: Warming The Internal Components And Cups
As long as the machine is on, the internal heater will keep the top plate warm. 6. Filling and Inserting the Portafilter The EC50 comes with a sieve that can accommodate a single or double shot of espresso. Note: when using ground coffee, always tamp lightly with the end of the measuring scoop and wipe any coffee grounds off the rim of the sieve and the portafilter. -
Page 7: Preparing Cappuccino
Turn the Selector Dial to the steam symbol on the left side. Within 10 to 15 seconds the EC50 will start releasing hot steam into the milk. During the steam release, the EC50 pump will make an intermittent noise indicating that droplets of water are inserted into the heating system to be converted into steam. -
Page 8: Cleaning The Frother
This way you don’t waste any milk. 9. Cleaning the Frothing Sleeve and Steam Wand It is extremely easy to clean the frothing system of the EC50, especially if it is done right after frothing milk. -
Page 9: Decalcifying
Wipe the brew head with a damp cloth. Caution: HOT! Danger of burning or scalding! • Rinse the water tank, the support grid and tray regularly with water. • Empty the drip tray regularly. • If the inner screen inside the brew head accumulates coffee oils, it can be unscrewed for thorough cleaning. - Page 10 Tip of steam tube is blocked. See chapter 9. If no steam comes out of the steam tube, then decalcify the steam tube. If the appliance is still blocked, call Jura Capresso customer service, see chapter 17. Not enough froth when frothing milk A) Milk not fresh.
-
Page 11: Recipes
Pump 20 to 30 oz of fresh water through the appliance (see chapter 13, Cleaning the System). Appliance does not operate (no power) Mechanical or electronic defect. Call the Jura Capresso Customer Service, see chapter 17. Missing parts Contact Jura Capresso Customer Service, see chapter 17. 15. Recipes... -
Page 12: Warranty
JURA CAPRESSO any other liability in connection with the sale of the machine. JURA CAPRESSO expressly disclaims liability for incidental and consequential dam- ages caused by the machine.