Table of Contents
Advertisement
6-1-4 PPTP / L2TP
Both the settings of PPTP and L2TP are the same. Here we will introduce the PPTP settings.
User ID
Password
PPTP Gateway
Connection ID
MTU
Connection Type
Idle Time Out
Input the User ID assigned by your ISP.
Input the Password assigned by your ISP.
Input the PPTP Gateway assigned by your ISP.
Input the Connection ID assigned by your ISP. (usually not use)
Input the MTU (maximum transmission unit
connection here. If you don't know, you can use default value: 1392.
Normally, the MTU of ADSL is 1492.
Please select the connection type of Internet connection you
wish to use. There are 3 options:
"Continuous": keep internet connection alive, do not disconnect.
"Connect on Demand": only connects to Internet when there's a
connect attempt,
"Manual": connect to Internet only when 'Connect' button on this
page is pressed, and disconnects when 'Disconnect button is pressed.
If you choose "Connect on Demand" as your connection type, here you
may specify the time to shutdown internet connection after no internet
activity is detected.
36
)
value of your network
Advertisement
Table of Contents
