Roland TD-303 Owner's Manual page 20

9
20
.TRANSPOSE
When writing a pitch one octave down (or up)
from the keyboard range, press the
SELECTOR switch
@
marked DOWN
(TRANSPOSE DOWN) or UP (TRANSPOSE
UP) for moving the range of the keyboards,
then press the appropriate key-switch.
The first "A" sound of the second measure is
one octave down from the keyboard on the
panel.
Press the PITCH MODE bl,ltton
C8) .
PITCH MODE
*
1~1
Press the TAP button
®
for confirmation.
ID.s.l
n:TI
I
WRITE/NEXT
I
TAP
Press the FUNCTION button
(Q.
c -
HOW TO USE THE WRITING TABLE FOR
TRANSPOSE
A
(black bar under the pitch letter)
.. represents a note one octave down.
...... holding the SELECTOR switch marked
DOWN down, press the key-switch.
A (black bar over the pitch letter)
... represents a note one octave up .
. . . . . . holding the SELECTOR switch marked
UP down, press the key-switch,