Icom IC-PCR100 Service Manual page 2

INTRODUCTION
This service manual describe the latest service information
for the IC-PCR100 COMMUNICATION RECEIVER FOR
COMPUTER at the time of publication.
MODEL VERSION
IC-PCR100
To upgrade quality, any electrical or mechanical parts and
internal circuits are subject to change without notice or
obligation
ORDERING PARTS
Be sure to include the following four points when ordering
replacement parts:
1. 10-digit order numbers
2. Component part number and name
3. Equipment model name and unit name
4. Quantity required
<SAMPLE ORDER>
1130004200 S.IC TC4S66F
8810008660 Screw PH B0 3 × 8 NI-ZU IC-PCR100 CHASSIS 4 pieces
Addresses are provided on the inside back cover for your
convenience.
SYMBOL
Europe EUR
U.K. UK
Canada CAN
U.S.A-1 USA-1
Other OTH
IC-PCR100 MAIN UNIT 1 piece
DANGER
NEVER
connect the receiver to an AC outlet or to a DC
power supply that uses more than 16 V. Such a connection
could cause a fire hazard and/or electric shock.
DO NOT
expose the receiver to rain, snow or any liquids.
DO NOT
reverse the polarities of the power supply when
connecting the receiver.
DO NOT
apply an RF signal of more than 20 dBm (100
mW) to the antenna connector. This could damage the
receiver's front end.
REPAIR NOTES
1. Make sure a problem is internal before disassembling
the receiver.
DO NOT
2. open the receiver until the receiver is discon-
nected from its power source.
DO NOT
3. force any of the variable components. Turn
them slowly and smoothly.
DO NOT
4. short any circuits or electronic parts. An insu-
lated tuning tool MUST be used for all adjustments.
DO NOT
5. keep power ON for a long time when the
receiver is defective.
READ
6. the instructions of test equipment thoroughly
before connecting equipment to the receiver.