Page 1
4. Press the button you 5. Follow the instructions of your garage door opener 6. Press the desired button want to use. to program the model G7M to the garage door you already setup to opener. operate the opener. If you have any questions, problems or missing parts, please call Skylink Customer Support 9:00AM –...
Page 2
If your garage door opener or remote has the 3- over again. position DIP switch, DO NOT use the ‘0’ position, use ‘+’ or ‘-‘. Set the DIP switch in G7M to ‘ON’ for ‘+’ or ‘OFF’ for ‘-‘ respectively. 4. Ensure the operating frequency is correct 5.