Kodak Pixpro SP1 User Manual page 6

Digital action cam
Hide thumbs Also See for Pixpro SP1:
Table of Contents

Advertisement

Do not use the product below 10 meters
underwater.
Do not use this product in a geothermal
spring.
Please do not open the rear cover
underwater.
If water accidentally comes in contact
with the product, please do not open the
rear cover immediately. Turn the product
off, and dry it with a clean, dry and lint
free cloth. Then open the rear cover, and
remove the battery and the memory card.
When opening the rear cover, if there
are water drops on the contact surface
between the inside of the rear cover and
the body, please do dry the water drops.
After using the product in water or near
sand, mud or other foreign materials,
please rinse it with clean water (close the
rear cover when cleaning). After cleaning,
dry the product with a clean, dry and lint
free cloth.
If there is dust, sand or other foreign
materials on the waterproof rubber of the
rear cover and its contact surface, please
wipe it with a clean, dry and lint free cloth
timely.
To ensure the waterproof capability of
the product, make sure before using that
there is no damage to or foreign matters
in the waterproof rubber, and then close
the rear cover tightly.
Waterproof rubber with scratches and
cracks will allow water to penetrate into
the product. Contact customer service
immediately for maintenance with
replacement of new waterproof rubber.
Rear Cover
Waterproof Rubber
5

Advertisement

Table of Contents
loading

Table of Contents