Kodak Pixpro SP1 User Manual page 30

2. Thread both ends of the band into the buckle, and then press the buckle clamp.
3. Align the location pole of the base to the location hole of the action cam, and align the
4. Assemble the base, pre-tightening handle and vented helmet strap mount according to the
direction illustrated in the picture. First press the base into the vented helmet strap mount,
and then rotate and tighten the pre-tightening handle.
Buckle
Base
Pre-tightening Handle
Buckle Adhesive Mount
Buckle Clamp
29