Yes - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Parameters
7.10.1.2

Yes

7.10.1.2.1 —
Dependent parameter
Maximum setpoint increase
Options:
This parameter determines the maximum adjustment that the analog control unit can make when
increasing the setpoint temperature in Comfort mode. The Comfort value set cannot be increased by more
than this.
The possible temperature adjustment range is from the center position of the rotary knob on the analog
room control unit all the way to the right. If the knob is as far to the right as possible, then the increase
is as high as possible (e.g. 3 K).
7.10.1.2.2 —
Dependent parameter
Maximum setpoint reduction
Options:
This parameter determines the maximum adjustment that the analog control unit can make when reducing
the setpoint temperature in Comfort mode. The Comfort value set cannot be reduced by more than this.
The possible temperature adjustment range is from the center position of the rotary knob on the analog
room control unit all the way to the left. If the knob is as far to the left as possible, the temperature
is reduced by the maximum (e.g. 3 K).
0...3...5 K
Note
0...3...5 K
Note
VC/S 4.x.1 | 2CDC508220D0211 Rev. A 171