Table of Contents
Advertisement
Troubleshooting
The ExpressCard and devices connected to the
1
computer do not work properly.
Please do the following:
2
1. Check that all the cables you are using are the correct
types, and that they are all securely connected.
3
2. Make sure all devices are powered on and connected to
the proper power supply and source.
3. Reconnect daisy-chained devices you may have
4
disconnected for installation. If reconnecting does not
clear up the problem, restart your computer.
5
4. Make sure you have properly installed the ExpressCard.
The computer did not detect the ExpressCard.
1. Make sure that the ExpressCard is correctly plugged into
the ExpressCard 54mm slot; if not, plug it in securely.
2. If the ExpressCard is plugged in correctly, see if its gold
connectors are clean; if not, clean the connector surface.
3. Follow the procedure on page 5 titled "Verifying Proper
Installation". If the ExpressCard designation "Silicon
Image Sil 3132 SATALink Controller" does not appear in
the Device Manager, update your computer BIOS to the
latest version (contact your computer manufacturer for
details). If after updating your BIOS, your computer still
does not detect the ExpressCard, contact your computer
manufacturer for advanced support for BIOS.
6 6 6
Advertisement
Table of Contents
