Using Bluetooth: Pairing Your Device Manually - iHome iX360 Instruction Manual

Pairing Your Device Manually
Pairing is the set-up process to introduce your Bluetooth-capable device to the iX360. Once
your device is paired, the iX360 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make
it "discoverable" by turning on Bluetooth mode (check in Options or Settings).
2. Press and hold the
powered on, it will enter auto-pairing mode and attempt to connect to a Bluetooth device.
Otherwise, follow step 3 to begin pairing.
3. Press and hold the
twice and the Bluetooth Button will flash quickly, indicating the unit is in pairing mode.
4. "iHome iX360" should appear in your device's Bluetooth menu. Select "iHome iX360" to connect it. If
prompted for a passcode, enter "1234" on your device's keypad.
iHome iX360
For iPhone
5. If pairing is successful, a tone will sound and the
the iX360 is ready to play music. There should also be an indication on your device. If no device is
successfully paired within 3 minutes the iX360 will default to previous mode. Once the iX360 is paired
to a device, it will attempt to autolink when the device is within range (about 30 feet).
Power Button 2 seconds to turn on the iX360. The first time the unit is
Bluetooth Pairing Button for 2 seconds. The pairing tone will sound
iHome iX360
For other
Multi-Function Button light will glow solid, indicating
9
iX360
Using the
iHome iX360
iHome iX360
P10