Hilti GX 3 Original Operating Instructions
  1. Manuals
  2. Brands
  3. Hilti Manuals
  4. Nail Gun
  5. GX 3
  6. Original operating instructions

Hilti GX 3 Original Operating Instructions

Hide thumbs Also See for GX 3:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Original Operating Instructions
Reference Test report no. 15009763
EUT: GX 3, GX 3-ME
FCC ID: SDL-GXR01
FCC Title 47 CFR Part 15 C
Date of issue: 2015-02-10
Annex acc. to FCC Title 47 CFR Part 15
relating to
Hilti Corporation
GX 3, GX 3-ME
Annex no. 5
User Manual
Functional Description
Title 47 - Telecommunication
Part 15 - Radio Frequency Devices
Subpart C – Intentional Radiators
Measurement Procedure: ANSI C63.4-2009
Date: 2015-03-13
Vers. no. 1.15
m. dudde hochfrequenz-technik
Rottland 5a
D-51429 Bergisch Gladbach/ Germany
Tel: +49 2207-96890
Fax +49 2207-968920

Advertisement

Table of Contents
loading

Related Manuals for Hilti GX 3

Summary of Contents for Hilti GX 3

  • Page 1 Reference Test report no. 15009763 EUT: GX 3, GX 3-ME FCC ID: SDL-GXR01 FCC Title 47 CFR Part 15 C Date of issue: 2015-02-10 Annex acc. to FCC Title 47 CFR Part 15 relating to Hilti Corporation GX 3, GX 3-ME Annex no.
  • Page 2 Reference Test report no. 15009763 EUT: GX 3, GX 3-ME FCC ID: SDL-GXR01 FCC Title 47 CFR Part 15 C Date of issue: 2015-02-10 User Manual / Functional Description of the test equipment (EUT) Date: 2015-03-13 Vers. no. 1.15 m. dudde hochfrequenz-technik...
  • Page 3 GX 3 Original operating instructions...

  • Page 5: Table Of Contents

    Contents Information about the documentation ........Conventions .

  • Page 7: Type Designation And Serial Number

    1.3 Type designation and serial number The type designation and serial number are printed on the type identification plate. ▶ Copy these details to the table below and provide this information when making an enquiry to your Hilti representative or to Hilti Service.
  • Page 8 Hilti Service unless otherwise stated in the operating instructions. ▶ Have the fastening tool repaired only by trained and qualified specialists using genuine Hilti spare parts. This will ensure that the safety of the fastening tool is maintained.

  • Page 9: Description

    ▶ Keep other people away from the working area, especially children. 3 Description 3.1 Items supplied 1 gas-actuated fastening tool with fastener guide, 1 toolbox, 1 operating instructions Accessories and consumables Approved accessories and consumables (gas cans and fasteners) can be found here: Internet: http://www.hilti.com...

  • Page 10: Parts And Operating Controls

    3.2 Parts and operating controls Grip Support leg Slider for fastener driving depth adjustment Magazine & and for releasing the fastener guide Type identification plate Fastener guide Gas can compartment...

  • Page 11: Fastener Guide

    The fastener guide holds the studs or, respectively, guides the nails and, when the tool is fired, thus directs the fasteners into the supporting material at the desired position. Application-specific fastener guides (IF or ME) are available for the ‚GX 3‘ and ‚GX 3-ME‘ fastening tools (see type identification plate for exact designation). 3.4 Fasteners Two types of fastener can be driven by the fastening tool: nails and threaded studs.

  • Page 12: Gas Can

    3.10 Gas can Note Observe the safety instructions provided with the gas can! In order to operate the fastening tool, the gas can must be inserted in the gas can compartment. The gas can status can be read from the LED display after pressing the ‚GAS‘ button. The gas can must be removed before breaks between working, before maintenance and before transporting or storing the fastening tool.

  • Page 13: Loading The Fastening Tool

    It may be used for a preliminary assessment of exposure. The declared vibration level represents the main applications of the direct fastening tool. However, if the direct fastening tool is used for different applications, with different items of equipment or accessories or is poorly maintained, the vibration level may vary. This may significantly increase the exposure to vibration over the total working period.

  • Page 14: Inserting The Single-Fastener Adapter

    Note In order to drive threaded studs, the magazine must first be emptied and an adapter for driving single fasteners inserted. 5.2.2 Inserting the single-fastener adapter ▶ Insert the single-fastener adapter ( → page 12). 5.2.3 Inserting the gas can ▶...

  • Page 15: Unloading The Magazine

    2. Press the gas can clip to release the gas can. 3. Remove the gas can from the gas can compartment. 4. Fit the cap on the gas can. 5. Close the gas can compartment cover. 7.2 Unloading the magazine 1.
  • Page 16 8.6 Removing the support leg 1. Release the support leg engaging mechanism by pressing lightly. 2. Rotate the support leg through 90°. 3. Remove the support leg. 8.7 Fitting the support leg 1. Bring the support leg into contact with the magazine at right angles and guide it into the slot. 2.
  • Page 17 ▶ Do not use the fastening tool if parts are damaged or if operating controls do not function faultlessly. ▶ Have a defective fastening tool repaired by Hilti Service. 10.4 Checks after care and maintenance work ▶ Move the fastener driving depth adjustment slider to the «+» position.
  • Page 18 12 Disposal Most of the materials from which Hilti tools, appliances and devices are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already...
  • Page 20 Hilti = registered trademark of Hilti Corp., Schaan 20150129...

Table of Contents