Simplicity 1695824 Operator's Manual page 13

SNOWTHROWER CONTROLS
A. Speed Select Lever — Allows the operator to use one of five
(5) forward and two (2) reverse speeds. To shift, move
speed select lever to desired position.
NOTICE: Do not move speed select lever while Traction
Control is engaged. This may result in severe damage to
the drive system.
B. Auger Control Lever — Used to engage and disengage the
auger and impeller. To engage push down, to disengage re-
lease.
C. Chute Rotation Swtich — Used to rotate the discharge
chute to the left or right.
D. Deflector Control Lever — Used to control the angle of the
chute deflector (up or down).
E. Free-Hand TM Control — After engaging the traction control
(left hand) and auger control (right hand), allows the operator
to release the auger control lever to use the other controls.
FEATURES AND CONTROLS
F. Easy-Turn TM Traction Control — When engaged, allows the
operator to release the left traction wheel, but allows the right
wheel to continue driving for easy turning.
G. Traction Control Lever — Used to propel snowthrower for-
ward or reverse. Push down to engage, release to disengage.
H. Grip Warmer Switch — Used to warm the hand grips (high
or low).
I. Clean-Out Tool — Used to remove snow and debris from the
discharge chute and the auger housing.
J. Skid Shoe — Used to adjust the ground clearance of the
auger housing.
K. Headlight — Used to operate the snowthrower in poor light-
ing conditions.
13