Step 2: Insert The Card - Belkin F6D301 User Manual

Installing and Setting Up the Card
Step 2 Insert
Insert the Card into your Computer
2.1
You will be prompted to remove
the CD and insert your Card. To
do so, remove the CD from the
CD-ROM drive and insert the
Card, label side UP, into your
computer's CardBus slot firmly
until it stops. Click "OK"
to continue.
2.2
The Found New Hardware Wizard
will appear. (This may take 15-20
seconds to appear.) Select "Install
the software automatically" and
click "Next" to install
the hardware.
2.3
The installation is now complete.
Click "Finish" to exit.
10 10