Belkin F6D3010 Quick Installation Manual

Make sure you have
1.
the following:
IMPORTANT: Install the software before inserting
the Card.
Installation Dual-Band Wireless A+G
Software CD Notebook Network Card
System Requirements
PC-compatible computer with:
CD-ROM drive
One available CardBus slot
Windows 98SE, Me, 2000, or XP
®
Start Quick Setup
Note:
If the Belkin Setup Utility screen does not appear
within 20 seconds, access your CD-ROM by
double-clicking on the "My Computer" icon
and double-click on the CD-ROM drive that the
installation CD has been placed in. Double-click
Make sure you have the following 1
on the folder named "files" then double-click on
the icon named "setup.exe".
Install
1.1
Insert the Installation Software CD into your
CD-ROM drive.
1.2
The Belkin Setup Utility screen will
automatically appear. (This may take
15-20 seconds). Click "install" to start
the installation.
Install
(click)
1.3 Click "Next" to install the software.
(click) Next
Install 2
1.4
Choose an installation location, then click
"Next" to accept the default location or
2.
click "Browse" to select a different location Insert
before clicking "Next".
Next
(click)
Insert the Card into your computer.
1.5
You might see a screen similar to this one.
This DOES NOT mean there is a problem.
Our software has been fully tested and is
compatible with this operating system.
Select "Continue Anyway" and follow the
on-screen instructions.
Continue Anyway
(click)
Install 3
2.1
You will be prompted to remove the CD
and insert your Card. To do so, remove
the software CD from the CD-ROM drive
then insert the Card, label side UP, into
your computer's CardBus slot firmly until it
stops. Click "OK" to continue.
OK
(click)
Insert 4
2.2
The Found New Hardware Wizard will
appear. (This may take 15-20 seconds).
Select "Install the software automatically"
and click "Next" to install the hardware.
Next
(click)
2.3
You might see a screen similar to this one.
This DOES NOT mean there is a problem.
Our hardware has been fully tested and
is compatible with this operating system.
Select "Continue Anyway" and follow the
on-screen instructions.
Continue Anyway
(click)
2.4
The installation is now complete.
Click "Finish" to exit.
Finish
(click)
Insert 5