ACR Electronics Nauticast 2607 User Manual page 92

EC TYPE EXAMINATION CERTIFICATE No. BSH/461214321220109
Page2o'f 2
Gomponents necessary for operation:
Components necessary fof
operation
Part No.
Remarks
NAUTICASTTM AIS
2607 Software-Version: 2.0.S1 05
Connection Box
2640
GPS Antenna AIS-A W/SM Coax
2639
VH-3200 VHF Stainless Steel Whip
Antenna 91.4cm (36in) 2628
or equivalent
The intemal GPS sensor of the NAUTICASTTM AIS is used as backup sensor for position reporting
Documentation:
User Manual NAUTICAST Automatic ldentification System:
InstallationManual NAUT|CASTAutomaticldentificationSystem:
Trade names:
The equipment is also available under the following trade names:
Y1-03-0203 Rev. L (2009-04-01)
Y1-03-0204 Rev. K (2009-04-01)
Company
A C R
ACR
Product Name
NAUTICASTTM2 AIS 2609
NAUTICASTTM lnland AIS
2662
(in SOLAS Mode)
ACR Part No.
of AIS transponder unit:
Limitations on the acceptance or use of the product:
Notes:
The manufacturer shall inform Bundesamt für Seeschifffahrt und Hydrographie, as the notified
body, of any modifications to the type-tested product(s) that may affect compliance with the
requirements or conditions laid down for use of the product(s).
In case the specified regulations or standards are amended during the validity of this
certificate, the product(s) must be re-certified before being placed on board vessels to which
such amended regulations or standards apply.
The Mark of Conformity (wheelmark) may onty be affixed to the type approved equipment, and
a Manufacturer's Declaration of Conformity may only be issued, if the product quality system
fully complies with the Marine Equipment Directive and is certified by a notified body against
ANNEX B module D. E. or F of the Directive.
Notice on legal remedies available:
Objection to this document may be filed within one month after notification. The objection must be filed in writing to,
or put on record at, Federal Maritime and Hydrographic Agency, Bemhard-Nocht-Str. 78, 20359 Hamburg, Germany