Voyage Settings (User Password Protected) - ACR Electronics Nauticast 2607 User Manual

3.5.3 Voyage Settings (User Password Protected)

NOTE: The default password from the factory is mentioned on your AIS display at the
protection foil. (see Appendix 0 for password information).!
Before entering Voyage Related Data for initial NAUTICAST operation, it is advised to configure the
User Password in:
Menu 5: Configuration
Submenu 1: Change User Password
o
N 1 31' E
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter
Dynamic Keys: Voyage Settings (User Password Protected)
[M5] [Enter]
After the Voyage Settings have been input and saved, this screen appears.
[Exit] takes the user back to the Main Menu.
o
N 1 30' E
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
|
User Manual
o
0 24' |1>0.10|2>1.30|3>1.80nm
User password protected!
Please enter user password:
| |
Confirm Password
Input
o
0 24' |1>0.10|2>1.30|3>1.80nm
Data saved.
| |
40
| Exit
Return to Vessel
[M8] [Exit]
Listing
| <-Exit
Y1-03-0203 Rev.L